5-Axis basic module UNILOCK QT steel oxidised 42201-12500
- Zero point clamping system
- Manual actuation
- Can be adapted to machine tables with grid holes or T-slots
- Extremely high repeat accuracy
- 5-side machining without interfering edges
Unità di vendita
€1,062.60
Aggiunto al carrello
Denominazione
Modulo base 5 assi
Versione 1
UNILOCK
Versione 2
serraggio doppio
Forma
A
Tipo di forma
senza spina antitorsione
Tipo di prodotto
senza piede
Materiale
Corpo base
acciaio da bonifica
Superficie
corpo base
ossidato
D=Diametro
80
H=Altezza
125
Codice UNSPSC
27112101
Coppia
di serraggio
max. Nm
15
Dimensioni
GRANDEZZA DEL SISTEMA 80MM
Forza di retrazione
kN
15
Forza di tenuta
F kN
50
SW
6
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Carbon steel.
Version
Main body oxidised.
Contact faces hardened and ground.
Contact faces hardened and ground.
Note
The UNILOCK 5-axis basic module can be adapted directly to subplates with grid holes or T-slots or to tooling plates with a hole pitch of 40/50 mm system size M12. Suitable for UNILOCK zero point clamping system with UNILOCK clamping bolts. Can also be used on the conventional zero point clamping systems by mounting an appropriate adapter clamping bolt.
The basic module without base is particularly suitable for space-saving set-ups.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M10, M12, M16 fastening screws:
- Clamping force (M10) 35,000 N
- Clamping force (M12) 50,000 N
- Clamping force (M16) 75,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
The basic module without base is particularly suitable for space-saving set-ups.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M10, M12, M16 fastening screws:
- Clamping force (M10) 35,000 N
- Clamping force (M12) 50,000 N
- Clamping force (M16) 75,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
Other customers also bought
