Sintered bronze similar to SINT A50.

Oil impregnated (ca. 25 percent by volume oil).
Hardness min. 25 HB.

The sintered bronze plain bearings are oil impregnated, self-lubricating, maintenance-free and ready for installation. During rotation the oil is applied to the shaft and absorbed by the bearing through capillary effect when stationary. Additional lubrication is not required under normal operating conditions.

Static load: max. 70 N/mm²
Dynamic load: max. 20 N/mm²
Friction coefficient, dry: 0.05 to 0.10
Sliding speed: max. 6 m/s
Maximum pv value: 2,45 N/mm² * m/s
Temperature range: -20 °C to +100 °C

Press in plain bearings, do not hammer in. The use of a suitable press mandrel is advisable. Without a mandrel there is a risk that the bearing may deform during installation. After press-fitting into a housing with bore H7 the bore D has a H7 tolerance.

Alloggiamento:
Si consiglia la tolleranza H7.

Albero:
Si consiglia la tolleranza da h6 a h9. Possono essere usati alberi temprati o non temprati con superficie rettificata (per applicazioni minori è possibile usare anche alberi trafilati).