Locating cylinder pneumatic QT steel nickel-plated 03161-216
- Fast opening and closing
- Pneumatic positioning and clamping system
- Reduced changeover times
- Quick and easy component assembly
Unità di vendita
€185.24
Aggiunto al carrello
Denominazione
Cilindro di posizionamento
Versione 1
pneumatico
Forma
B
Materiale
Corpo base
acciaio da bonifica
Superficie
corpo base
nichelato
D1=Diametro esterno
51
D=Diametro
16
Capacità di carico
per coppia
kg
56
Codice UNSPSC
31162800
D10
52
D11
M5
D2
32
D3
31,4
D4
5,5
D5
9,5
D6
41
D7
M5
D8
31,8
D9
20
Forza di tenuta
F1
N
350
H
8,5
H1
25,5
H2
9,5
H3
28,5
H4
4
H5
9
H6
26,5
H7
10
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Carbon steel.
Version
nickel-plated.
Note
The 3 clamping balls are released by applying compressed air.
The 3 clamping balls retract and the fixture can be changed. When the air pressure is removed, the 3 clamping balls move outwards and the fixture is clamped.
This easy-to-use system significantly reduces changeover times.
The repeat precision is ± 0.01 mm.
If the maximum working load limit is exceeded or the module is set vertically, a repeat accuracy of 0.01 mm can no longer be guaranteed.
The locating cylinders and bushes should be positioned at equal distances from the centre of the fixture plate.
The maximum working load limit is calculated from the sum of the weight of the fixture plate, the clamping fixture and the workpiece.
The maximum working load limit applies when two module packs are used. A module pack consists of a locating cylinder K1219 and a locating bush K1220.
The 3 clamping balls retract and the fixture can be changed. When the air pressure is removed, the 3 clamping balls move outwards and the fixture is clamped.
This easy-to-use system significantly reduces changeover times.
The repeat precision is ± 0.01 mm.
If the maximum working load limit is exceeded or the module is set vertically, a repeat accuracy of 0.01 mm can no longer be guaranteed.
The locating cylinders and bushes should be positioned at equal distances from the centre of the fixture plate.
The maximum working load limit is calculated from the sum of the weight of the fixture plate, the clamping fixture and the workpiece.
The maximum working load limit applies when two module packs are used. A module pack consists of a locating cylinder K1219 and a locating bush K1220.
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
Other customers also bought
