Material
Steel 1.0503 (C45).
Version
Milled toothing, straight teeth.
Engagement angle 20°, bright.
Engagement angle 20°, bright.
Mostra di più
Mostra di meno
Ruote dentate cilindriche in acciaio, modulo 5, dentatura fresata, dentatura dritta, angolo di pressione 20°, forma A, con mozzo
da
54,73 €
+ IVA
più le spese di spedizione
Ruote dentate cilindriche in acciaio, modulo 5, dentatura fresata, dentatura dritta, angolo di pressione 20°, forma B, senza mozzo
da
112,90 €
+ IVA
più le spese di spedizione
Descrizione
Material
Steel 1.0503 (C45).
Version
Milled toothing, straight teeth.
Engagement angle 20°, bright.
Engagement angle 20°, bright.
Note
Up to 30 teeth with hub, from 32 teeth disc form. The spur gears have a centre bore or are pre-drilled (this may vary depending on the manufacturing process). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore that the spur gears are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer.
In order to achieve exact concentricity between the toothing and the bore, we recommend enlarging the pilot hole to the required diameter on a lathe. Alternatively, bushes can be fitted by the customer to reduce the diameter.
In order to achieve exact concentricity between the toothing and the bore, we recommend enlarging the pilot hole to the required diameter on a lathe. Alternatively, bushes can be fitted by the customer to reduce the diameter.
Drawing reference
Form A: with hub
Form B: without hub
Form B: without hub
Altri clienti hanno acquistato anche
